Monday 8 August 2016

LED Traffic Lights Decreases Power Consumption By 80 Percent

According to a report every year more than four million traffic lamps uses a predicted three-billion kilowatt-hours electrical energy. Changing to power-efficient LED traffic lights trims municipal budgets and reduces power use worldwide. A majority of country switched to LED traffic lights and rightly so.

 

LED traffic lamps are more competent & sturdy – retrofitting & installation is an exceedingly effective and easily executed program for cities. There’re 3 main benefits to advancing municipal traffic lights to LEDs and they are:

• LEDs are much brighter – Distributing illumination more evenly, making them more noticeable in hazy conditions.

• LED traffic signal lights can survive for almost 100,000 hours in comparison to incandescent lamps, which contain filaments that burn out and last just about eight thousand hours before requiring to be substituted.

• Substituting lamps costs cash and the replacement procedure hinder traffic flow. Lesser burned-out lamps also boost the security of intersections.

Some other interesting facts about traffic lighting:

• General incandescent traffic lamps employ 100 to 150 watt lamps that operate 24x7, using more than 2.4 kilowatt-hours per day.

• At eight cents per kilowatt-hour, 1 intersection can cost nearly $600 per year in electric bill. Bigger towns with a great number of intersections invest millions of dollars on electrical energy just for the activity of traffic lamps.

• LED arrays use 12 to 20 watts in place of 100, decreasing overall power consumption significantly.

• Solar powered panels can run LED traffic signals in isolated regions, decreasing the expenditures related with fitting power lines.

• Another advantage of LED operated traffic signals is the truth that they don’t burn out all at once – when a typical incandescent filament burns out, the whole lights stop functioning, in LED lamps, an individual diode or a bunch of diodes can stop functioning, but the other diodes running independently will carry on to function as usual. This aspect eradicates the safety risks traffic blocking issues related with burnt-our traffic signals.

• Traffic flow supervision encompasses of set light timing, triggered traffic symbols, signal synchronization & more techniques that run to enhance the flow of traffic. With these programs travelers must experience a decrease in travel time, fewer gas use and cost saving because of the synchronization of signals. Environmentally, these approaches will upshot in decreased air contamination and GHC release from idling.

The good news is, it is now feasible to buy LED in all 3 colors required for traffic signals: red, blue and yellow.

0 comments:

Post a Comment